Cobra Parawedge Concrete Anchors 5/8inX6in LOT OF 5

Description

Cobra Parawedge Concrete Anchors 5/8inX6in LOT OF 5.
"The Parawedge Anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end, and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360degree one piece clip that functions as a two piece clip for more contact, a torque controlled expansion, and can be installed into a bottomless hole."
-Parabolic mandrel for a smoother expansion
-360degree 1 piece clip that functions as a 2 piece clip
-Can be installed into a bottomless hole
-Cold formed for increased strength
-Drill an appropriate size hole into base material
-Clean hole using a dust blower or compressed air
-Insert the nut with a clearance of 1/8" to the top of the anchor
-With a hammer or light mass, insert the anchor into the hole
-Remove the nut and insert the object to be  installed
-Using a wrench, tighten the nut by turning clockwise until there is a strong resistance (2 to 3 turns will fully set the anchor)
Condition is "New". Shipped with USPS Priority Mail.