24 NEW Cobra Parawedge Concrete Anchor w/ Nuts & Washers 3/8" x 3-3/4" 498NS

Description

Brand new individually packaged in original manufacturer plastic bag.
24 NEW Cobra Parawedge Concrete Anchor w/ Nuts & Washers 3/8" x 3-3/4" 498NS
Parabolic mandrel for a smoother expansion
360° 1-piece clip that functions as a 2-piece clip
Can be installed into bottomless hole
Cold formed for increased strength
Drill an appropriate size hole into base material
Clean hole using a dust blower or compressed air
Insert the nut with a clearance of 1/8'' to the top of the anchor
Insert the nut with a clearance of 1/8'' to the top of the anchor
With a hammer or light mass, insert the anchor into the hole
Remove the nut and insert the object to be installed
Using a wrench, tighten the nut by turning clockwise until there is a strong resistance. (2 to 3 turns will fully set the anchor).
The Parawedge™ anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end, and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360° one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion, and can be installed into a bottomless hole.